Please ensure that you have read through the Flyway Safety before starting the installation.
Flyways should be installed on a machined mounting table with the threaded mounting holes on each of the Flyway’s four feet. For precision locating of the Flyway to the mounting table, dowel hole/slot alignment features are provided on two opposite feet of the Flyway. See Mounting Table Plate Guide for detailed requirements of a Flyway mounting tableplate.
For mounting auxiliary equipment directly to the Flyways, two M5 threaded holes are provided on each side of the Flyways.
...
Carefully place the Flyway onto the mounting plate (M1)
Insert 2x 4mm Dowel Pins (P1 & P2) through the mounting plate and into the Flyway body
Install 2x M8 Screws (S1 & S2)
Remove 2x 4mm Dowel Pins (P1 & P2)
Install 2x M8 Screws (S3 & S4)
...
See also: Flyway Cooling Setup
...