Configure Digital Input To Reset DO

Use a Digital Input to turn off a Digital Output configured using the Configure Digital Output from PMC command. See Send Digital Input to PMC

Fieldbus Interface

PMC_ConfigDI2Reset

Name	Data Type	Description

Name	Data Type	Description
Execute	BOOL
nDI	USINT	Number of digital inputs to configure, 1 to 22
DiID	USINT[0..21]
RstDoID	USINT[0..21]	, of digital output to reset (turn off)
PM_Controller	PMControllerType

Name	Data Type	Description

Operating Conditions

Operating Conditions
Preconditions	None
Postconditions	Specified Digital Inputs is set to turn off the specified Digital Outputs

Use a Digital Input to turn off a Digital Output configured using the Configure Digital Output from PMC command.

Event triggered Digital Outputs can only be turned off using this command.