RFID Reset IDs

Absolute ID maintains the IDs of all movers since they were added to the system. When a new mover is used to replace an existing mover, the IDs of movers on the system may no longer be continuous.

In some cases, it is desirable to reset all previously assigned absolute IDs, so the movers can be renumbered sequentially starting from 1.

This function block resets all previously assigned absolute IDs.

Fieldbus Interface

PMC_RFID_ResetIDs

Name	Data Type	Description

Name

Data Type

Description

Execute

BOOL

PM_Controller

PMControllerType

Name	Data Type	Description

Name	Data Type	Description
Done	BOOL
Busy	BOOL
Aborted	BOOL
Error	BOOL
ErrorID	UINT

Conditions

Operating Conditions

Operating Conditions
Preconditions	PMC must be in the INACTIVE state.
Postconditions	Previously assigned Absolute IDs will be reset.

Description